Items where Subject is "Engineering"

.

., Shoufei Hu (2024) Improve Customer Satisfaction through Effective Concrete Distribution Strategies. Journal of Engineering Research and Reports, 26 (6). pp. 362-370. ISSN 2582-2926

A

Alharbi, Ahmed A. and Almaleki, Ahmad A. and Mashraei, Yousof A. and Almadih, Mustafa H. and Alqahtani, Naif B. and Alkhedhair, Abdullah M. and Alabduly, Abdullah J. and Alshunaifi, Ibrahim A. and Albishi, Miqad S. and Almayeef, Abdullah A. (2022) A Comprehensive Experimental Study on NOx Emissions and Fuel Consumption for SI Engine Fuelled with a Mixture of Gasoline, Hydrogen-rich Synthesis Gas and Hydrous Ethanol. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 7-62. ISBN 978-93-5547-618-0

Almeida, Miguel and Porto, Leonardo and Viegas, Domingos (2021) Characterization of Firebrands Released From Different Burning Tree Species. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Alsaady, Mustafa (2021) Modeling and Multi-Objective Optimization of Thermophysical Parameters of Hybrid Nanodiamond–Ni-Based Nanofluids via Response Surface Methodology. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Anggraini, L. and Sugeng, . (2021) Analysis of Porosity Defects in Aluminum as Part Handle Motor Vehicle Lever Processed by High-pressure Die Casting: Recent Advancement. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 99-105. ISBN 978-93-90888-10-8

Anitha, A. Arul and Arockiam, L. (2021) Promoting a Clean and Hygienic Environment Using Internet of Things. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 123-131. ISBN 978-93-91215-49-1

B

Babu, N. Sharath and Raju, G. Sreenivasa and Sajja, Amrita (2020) A Comparative Analysis of Two Stage and Folded Cascode Bulk Driven OTA in 0.18um CMOS Process. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 135-142. ISBN 978-93-90149-36-0

Baradaran, Yasaman and Baghani, Mostafa and Kazempour, Morteza and Hosseini, Seyed Kianoosh and Karimpour, Morad and Baniassadi, Majid (2021) Design and Shape Optimization of a Biodegradable Polymeric Stent for Curved Arteries Using FEM. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Belloni, Márcio and Conti, Thadeu das Neves (2019) The Connection of Solar Generators to the Electricity Distribution Network as a Means of Mitigating Environmental Impacts by Dispensing the Banks of Accumulators. Energy and Power Engineering, 11 (12). pp. 392-397. ISSN 1949-243X

Bhat, P. and Berryman, S. and Burkhardt, A. and Cho, M. and Ferkau, S. and Gharbiah, H. and Johnston, K. and Kaiser, A. and Lynch, K. and Mittman, S. and Risch, Q. and Swansen, M. (2021) Manufacturing Bill-of-Materials Plus Operations Visualization Using D3. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 80-90. ISBN 978-93-90888-10-8

C

Chandel, Tarana Afrin and Mallick, Md Arifuddin and Yasin, Mohd Yusuf (2021) Performance Analysis of Rooftop Grid Connected Solar Photovoltaic System. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 156-181. ISBN 978-93-91215-49-1

D

Daud, K. and Mansor, M. B. M. and Soh, Z. H. Che and Samat, A. A. Abd and Shafie, M. A. and Ismail, A. P. and Abdullah, M. H. (2022) Windowing Based Continuous S-Transform (ST) with Deep Learning for Detection and Classifying Power Quality Disturbances (PQDs). In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 120-131. ISBN 978-93-5547-686-9

Daula, S. M. Shamsheer and Khan, G. Amjad and Ramesh, Sri G. and Reddy, Sri M. Madhusudhan (2020) Adaptive Block Memory Management for Spatial and Temporal Locality in Flash Based Storage Systems: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 86-90. ISBN 978-93-90149-36-0

Dhurvey, S. N. and Chandrakar, V. K. (2022) Improvement of Power System Performance Using Fuzzy Logic Based Interline Power Flow Controller [IPFC]: A Brief Study. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 108-120. ISBN 978-93-5547-391-2

Dike, H. N. and Dosunmu, A. and Kinigoma, B. and Akaranta, O. (2019) Characterization of Chemically Modified Cashew Nut Shell Liquid. Journal of Engineering Research and Reports, 8 (4). pp. 1-8. ISSN 2582-2926

F

Fowler, J. Elliott and Gorb, Stanislav and Baio, Joe E. (2021) Multi-Technique Investigation of a Biomimetic Insect Tarsal Adhesive Fluid. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

G

Galarza, Jose and Condezo, David and Camayo, Becquer and Mucha, Enrique (2020) Assessment of Wind Power Density Based on Weibull Distribution in Region of Junin, Peru. Energy and Power Engineering, 12 (01). pp. 16-27. ISSN 1949-243X

Ganesh, Ch. and Kumar, T. Sravan and Pallavi, S. and Reddy, G. Sai Preetham (2024) Design and Analysis of Dynamic Comparator for High Speed Digital Applications. In: Theory and Applications of Engineering Research Vol. 3. B P International, pp. 157-176. ISBN 978-81-969435-5-4

Garcia, Ramon Ferreiro (2020) Background on Heat Energy Concepts. B P International. ISBN 978-93-90431-67-0

Garcia, Ramon Ferreiro (2020) Description and Analysis of 3CP-based Thermal Cycles. B P International. ISBN 978-93-90431-67-0

Garcia, Ramon Ferreiro (2020) Fundamental Closed Processes Based Thermal Cycle Structures. B P International. ISBN 978-93-90431-67-0

Garcia, Ramon Ferreiro (2020) Power Plants and Cycles: Advances and Trends. B P International. ISBN 978-93-90431-67-0

H

Huichaqueo, Marco Oyarzo (2024) Knee Osteoarthritis Detection Using a Machine Learning Method from Magnetic Resonance Imaging: A 3-D Independent Component Analysis-Based Approach. In: Theory and Applications of Engineering Research Vol. 2. B P International, pp. 166-176. ISBN 978-81-969141-0-3

I

I. Aneke, Jude and Ezechukwu, O. A. and Tagboh, P. I. (2019) Hybrid Pattern Recognition and Multi-resolution Analysis (MRA) Based Fault Location in Power Transmission Lines. Journal of Engineering Research and Reports, 8 (4). pp. 1-14. ISSN 2582-2926

Ilori, Abidemi Olujide and Uko, Charles Etim Akpan and Umoh, Ini Christopher (2019) Local Geology, Shear Strength Properties and Bearing Capacity of Coastal Plain Sands in Uyo Metropolis, Akwa-Ibom State, Southeastern Nigeria. Journal of Engineering Research and Reports, 8 (4). pp. 1-23. ISSN 2582-2926

Immich, Ana Paula S. and Tornero, José Antonio and Casas, Francesc Cano and Arias, Manuel J. Lis (2021) Diffusional Approach on Electrospun PLLA Membranes for Caffeine Delivery. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 67-79. ISBN 978-93-90888-10-8

Ita, Okon, Edet and Ndubuka, Chinedu Ikenna (2024) Maximizing Oil Recovery in a Marginal Oilfield: Niger Delta Case Study. Journal of Engineering Research and Reports, 26 (4). pp. 104-119. ISSN 2582-2926

J

Jasim, Noor A. and Hameed, Emad M. and Jasim, Sarah A. (2022) Implementation of E-Governments System in Iraq. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 63-77. ISBN 978-93-5547-618-0

K

Karthikeyan, S. and Jeevananthan, K. M. and Prabakar, T. Karis and Harini, R. and Kannan, S. P. Murali (2022) Structural Behaviour of Cold Formed Steel Sections Based on Fasteners. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 1-12. ISBN 978-81-959996-6-8

Kavitha, K. and Mangalam, H. (2020) Hybrid Multilevel SMTC/STTC Modulation for Fast Fading MIMO Channel. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 112-122. ISBN 978-93-90149-36-0

Khachiyan, E. Y. (2021) Methods of Determination of Predominant Vibration Periods for Non-homogeneous Multilayer Ground Sites. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 94-149. ISBN 978-93-5547-166-6

Kumaar, K. Santhosh and Muralimohan, N. and Paranthaman, M. and Tamilselvan, V. and Udhayaprakash, M. and Kumar, K. Arun (2022) Multimodal Complex Road Network and Its Traffic Organization using GIS. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 97-110. ISBN 978-93-5547-686-9

L

Lefevre, Mathilde and Tran, Thi Quynh and De Muijlder, Thomas and Pittenger, Bede and Flammang, Patrick and Hennebert, Elise and Leclère, Philippe (2021) On the Nanomechanical and Viscoelastic Properties of Coatings Made of Recombinant Sea Star Adhesive Proteins. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

López, A. and Lis, M. J. and Bezerra, F. Maesta and Vilaseca, M. and Vallés, B. and Prieto, R. and Simó, M. (2021) Recent Study on Production and Evaluation of Antimicrobial Microcapsules with Essential Oils Using Complex Coacervation. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 50-66. ISBN 978-93-90888-10-8

M

Mahmoud, Ines and Saidi, Imen (2022) Internal Model Control for Non-square Processes with Time-delays Based on Non-square Effective Relative Gain. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 132-140. ISBN 978-93-5547-686-9

Meti, Basappa and Sitaram, Nagaraj (2022) Optimum Pressure Loss and Flow Distribution at Pipe Trifurcation: An Experimental Approach. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 13-21. ISBN 978-81-960551-3-4

Mohapatra, Swagatika and Parhi, P. K. (2022) Properties of Recycled Concrete and Coconut Shell Aggregate Concrete: An Experimental Investigation. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 121-128. ISBN 978-93-5547-391-2

N

Nguimdo, Leonard Akana and Kum, Clinton (2020) Optimization and Sizing of a Stand-Alone Photovoltaic System and Assessment of Random Load Fluctuation on Power Supply. Energy and Power Engineering, 12 (01). pp. 28-43. ISSN 1949-243X

Nwachukwu, C. P. and Orakwe, L. C. and Okoye, N. M. (2019) Development and Evaluation of a Drip Irrigation System in Southeastern Nigeria. Journal of Engineering Research and Reports, 8 (4). pp. 1-9. ISSN 2582-2926

Nwanna, E. C. and Orakwe, L. C. and Chukwuma, E. C. and Nwachukwu, C. P. and Okpala, C. D. and Maduegbuna, J. I. and Oyeoka, H. C. (2024) Physical and Chemical Scrutiny of Obizi River in Awka South Local Government Area of Anambra State, Nigeria for Domestic Consumption. Journal of Engineering Research and Reports, 26 (2). pp. 170-180. ISSN 2582-2926

O

Ozioko, F. C. and Iweka, Sunday Chukwuka and Nwanze, N. E. and Adepoju, T. F. (2024) Effect of Thermally Extracted Carrot Oil Using Biomass Solvent to Boost Consumer Goods: Box-Behnken Design Approach. Journal of Engineering Research and Reports, 26 (3). pp. 113-124. ISSN 2582-2926

P

Papadopoulos, P. G. and Xenidis, H. and Lazaridis, P. and Diamantopoulos, A. and Lambrou, P. and Arethas, Y. (2020) Achievements of Truss Models for Reinforced Concrete Structures: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 91-100. ISBN 978-93-90149-36-0

Pari, J. Britto and Rani, S. P. Joy Vasantha (2020) An Optimized Architecture for Adaptive Digital Filter: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 123-134. ISBN 978-93-90149-36-0

R

Raj, R. Ajith and Sai, P. H. V. Sesha Talpa and Mohaideen, M. Mohammed (2022) Effect of Processing Parameters on Mechanical Properties of MMCs by Friction Stir Process. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 141-150. ISBN 978-93-5547-686-9

Raut, V. D. and Deshpande, A. V. (2021) Research on Effect of Li2O on the Properties of Bismuth Borate Glasses. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 91-98. ISBN 978-93-90888-10-8

Rufer, Alfred and Villeneuve, Pierre (2022) Efficiency Considerations for the Charge or Refill of Autonomous Vehicles - A Fast Filling Station for a Compressed-Air Vehicle. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 91-103. ISBN 978-93-5547-618-0

S

Sahandifar, Pooya and Kleiven, Svein (2021) Separate and Combined Effects of Geometrical and Mechanical Properties Changes Due to Aging on the Femoral Strength in Men and Women. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Salami, Abidemi Ayodotun and Igwenagu, Udochukwu ThankGod Ikechukwu and Mesode, Cassandra Esambe and Olaniyi, Oluwaseun Oladeji and Oladoyinbo, Oluseun Babatunde (2024) Beyond Conventional Threat Defense: Implementing Advanced Threat Modeling Techniques, Risk Modeling Frameworks and Contingency Planning in the Healthcare Sector for Enhanced Data Security. Journal of Engineering Research and Reports, 26 (5). pp. 304-323. ISSN 2582-2926

Saxena, Ashish K. and Ness, Stephanie and Khinvasara, Tushar (2024) The Influence of AI: The Revolutionary Effects of Artificial Intelligence in Healthcare Sector. Journal of Engineering Research and Reports, 26 (3). pp. 49-62. ISSN 2582-2926

Sebastian, Ekop Ubong and Okpo, Ekom Enefiok and Nkan, Imo Edwin (2024) Dynamic Simulation and Analysis of Three Phase Induction Motor for Faults Detection using Matlab/Simulink. Journal of Engineering Research and Reports, 26 (11). pp. 286-303. ISSN 2582-2926

Selesi-Aina, Oluwatosin (2024) Blockchain-enhanced Cloud Security Frameworks: Addressing Human-network Vulnerabilities in Public and Private Sector Systems. Journal of Engineering Research and Reports, 26 (11). pp. 242-263. ISSN 2582-2926

Shamir, Eliezer (2021) Calibrating Codes Safety Factors for Different Life Cycles - Proposed Simplified Procedure. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 132-145. ISBN 978-93-91215-49-1

Simões, Teresa and Estanqueiro, Ana and Alves, Jorge Maia (2019) Identification of the Sustainable Wind and Solar Potential in Urban Areas Using a GIS Methodology. Energy and Power Engineering, 11 (12). pp. 398-413. ISSN 1949-243X

Sonar, S. G. and Nalawade, R. V. (2020) Performance Assessment of Green Rated Built Environment Using Post Occupancy Evaluation: New Perspectives. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 101-111. ISBN 978-93-90149-36-0

Sonawane, M. S. and Dhawale, C. A. (2024) Study about Performance Analysis of Image Enhancement Techniques for Optical Character Recognition (OCR). In: Theory and Applications of Engineering Research Vol. 3. B P International, pp. 177-187. ISBN 978-81-969435-5-4

Sooriyalakshmi, N. and Helena, H. Jane (2022) A Brief Overview on Thermal Conductivity of Insulating Materials. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 78-90. ISBN 978-93-5547-618-0

Sow, Ousmane and Ba, Mamadou Lamine and El Moujtaba, M.A.O. and Traore, Youssou and Sow, El Hadji and Sarr, Cheikh Tidiane and Diop, Masse Samba and Sissoko, Grégoire (2020) Electrical Parameters Determination from Base Thickness Optimization in a Silicon Solar Cell under Influence of the Irradiation Energy Flow of Charged Particles. Energy and Power Engineering, 12 (01). pp. 1-15. ISSN 1949-243X

Stikvoort, Walther (2021) Study on Load Capacity Limits of Flanged Pressure Vessel Nozzles. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 86-93. ISBN 978-93-5547-166-6

Szaraniec, Edward (2022) Redshift: Expansion of Space or Inhomogeneities? In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 129-133. ISBN 978-93-5547-391-2

T

Tamburini, Laura and Marchesich, Giovanni (2021) A Multidisciplinary Approach to Mobility Education Based on Traffic Physics and Crowd Theory. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 146-155. ISBN 978-93-91215-49-1

U

Udousoro, Deborah A. and Dansoh, Cliff (2019) Hydrogen Production through a Solar Powered Electrolysis System. Journal of Engineering Research and Reports, 8 (4). pp. 1-14. ISSN 2582-2926

V

Vourdoubas, John (2022) Study about Water-energy Nexus in the Island of Crete, Greece. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 134-146. ISBN 978-93-5547-391-2

W

Wu, Chao and Wu, Qing and Ma, Feng and Wang, Shuwu (2023) A Heterogeneous Information Fusion Method for Maritime Radar and AIS Based on D-S Evidence Theory. Engineering, 15 (12). pp. 821-842. ISSN 1947-3931

Y

Yamunadevi, G. and Bhuvaneswari, G. and Rameshkumar, S. and Karthikeyan, P. (2022) Electrochemical Evaluation of Moisture Dependent Proton Conductivity of a Nickel(II) Complex. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 111-119. ISBN 978-93-5547-686-9

Yusoff, M. S. M. and Sulaiman, R. and Shafinah, K. and Fatihah, R. and Abdullah, J. (2022) Prototype Model Approach for Developing a Computed Tomography Scanner Application. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 98-107. ISBN 978-93-5547-391-2

Z

Zhang, Yun and Li, Shanpeng and Zuo, Pingcheng and Xu, Xiangling and Li, Jing and Liu, Jianlin (2021) Adhesion Behaviors of Abalone Under the Action of Water Flow. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Zhou, Zhenquan (2022) The Obstacles to Promoting the Modular Building Project: A Tentative Assessment of the Literature. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 1-6. ISBN 978-93-5547-609-8